ASTEL TSA 082, Operating Instructions Manual

Page: 9 / 16

9
Set the number of frames by pressing up/down selectors.
Press "
•
", select the next setting:
"5"
(ALARM activity)
Select "0." for "off" and "1." for CHANNEL A or "2." for CHANNEL B.
Press "
•
", select the next setting:
"6"
(ALARM seq. time)
Adjust sequential time by pressing up/down selectors.
Next setting:
"7"
(ALARM duration time)
Adjust alarm duration time by pressing up/down selectors.
Next setting:
"8"
(ALARM frame switch)
Select "0." for "off" and "1." for "on".
Select the next setting:
"9"
(ALARM triggering)
Select "0." for negative triggering and "1." for positive triggering on the LED display.
Next setting:
"A"
(REMOTE CONTROL)
Select "0." for "off" and "1." for "on".
Next setting:
"b"
(LINE LOCK PHASE)
Adjust line-lock phase by pressing "
•
":
LED 1 lights, LED display shows polarity - "0." for negative and "1." for positive, press "
•
":
LED 2 lights, LED display shows "0" for 0xx to 0yy steps, "1" for 1xx to 1yy steps, press "
•
":
LED 3 lights, LED display shows "0" for x0x to y0y steps, "1" for x1x to y1y steps etc., press "
•
":
LED 4 lights, LED display shows "0" for xx0 to yy0 steps, "1" for xx1 to yy1 steps etc., press "
•
":
Next setting:
"C"
(SAVE the SET-UP)
Press "
•
":
"-."
Select "1." or "0." for saving or not saving the new SET-UP.
Select "-." to return to SET-UP.