ASTEL MXU01, Operating Instructions Manual

Page: 8 / 12

8
Programming the light address
The set up procedure:
1. Connect the light to the DMX512 interface MXU01
2. Connect the light to the power supply
3. Switch-on the light – the light must light!
4. Switch-off the light – the light must NOT light!
5. Disconnect the light from power supply
6. Connect the DMX interface LXU03 to the power supply
7. Set the switch 12 to ON position
8. Set the programming mode – with the switches 5 – 8 to ON position
9. Set the light new address to 1-15 - with the switches 1 – 4
10. Connect the light to the power supply and IMMEDIATELY continue with step 11!
11. Set the switch 11 to ON position
12. Wait for 5 seconds
13. Set the switch 11 to OFF position
14. Set the switch 12 to OFF position
APPEARANCE
21
DMX SETTINGS
DMX
IN
OUT
C
DC IN
D
D
1 2 3 4 5 6 7 8 9 10 11 12
ON
MXU01
67
80
TECHNICAL SPECIFICATIONS
Input voltage 12-24 Vdc
Consumption max. 50 mAdc
Operating temperature -10

C - +50

C
Casing ABS
Dimensions max.
67x80x21mm
Weight 0.1 kg
Design and specifications subject to change without notice.