7
CONTROLS
Single-color cool white (W), warm white (WW), blue (B), green (G) or red (R) models
Remote control can be used to turn-on and turn-off the underwater pool light and to control the
luminosity.
Dimming
The dimming are enabled by using optional PWM dimmer LDU13.
DMX512 control
The network connection to control the lights with the standard DMX512 protocol is enabled by using
optional PWM dimmer LDU13 and optional LXU01 interface.
Multi-color (RGB, RGBW) models
Remote control has to be used to turn-on and turn-off the underwater pool light and to control the
mode of lighting and luminosity.
The multi-color underwater pool light can be controlled by using the momentary-switch.
When the light is turned-off
the color or mode of lighting can be changed sequentially by pressing
the momentary switch for 2 seconds:
METEOR XP
Sequence of lighting
Custom Color
Full RGB / RGBW
Neutral White
White
Red
Green
Blue
White Color Spectrum
Custom White Color
(Rainbow) Color Spectrum
Turning on /off
Press the momentary switch shortly.
Changing the color or mode of lighting
When the light is turned-off press the momentary switch for 2 seconds.
Setting the Custom White Color
At the selected White Color Spectrum mode press the momentary switch shortly to turn the light off.
After that press the momentary switch for 5 seconds or until the light is switched to the selected white
color and then the White Color is set and selected.
Setting the Custom Color
At the selected (Rainbow) Color Spectrum mode press the momentary switch shortly to turn the light
off. After that press the momentary switch for 5 seconds or until the light is switched to the selected
color and then the Custom Color is set and selected.
Dimming
When the light is turned-on press the momentary switch until the desired illumination is achieved. By
another pressing of the momentary switch the luminosity will increase to the maximum illumination.
