ASTEL EQUATOR MSR0640, Operating Instructions Manual

Page: 3 / 12

3
PREFACE
The EQUATOR MSR0640 series of a compact
ultra-thin underwater light with built-in driver is
designed to use the latest LED lighting
technology.
The surface-mount designed casing enable
very simple installation on the stern and both
sides of the hull without making any bigger
holes through the hull under waterline.
All the models are available in aluminium
bronze casings. The lighting is available in
white, blue or green colors with 6 power LEDs.
FEATURES
•
Innovative and Patented Design
•
Aluminium Bronze (AB2) Ultra-Thin Casing
•
6 Power LEDs Design
•
White, Blue or Green Lighting
•
High Grade Polycarbonate Glass Optical
Window
•
Vacuum Metalized Reflector
•
Remote Control
•
Digital Dimming
•
Polarity Protection
•
Transient Protection
•
Thermal Protection
•
Wide Range Power Supply
•
Low Power Consumption
•
Simple Installation
PRECAUTIONS
•
The underwater light has to be installed and
used in accordance with the instructions of
this manual only.
•
The power supply has to be disconnected
before installation.
•
The underwater light is recomended to be
installed around 0.2 m below the waterline
for the best illumination and to avoid over-
heating.
•
Do not try to install or remove the
underwater light while the vessel is in the
water.
•
The optical window has to be cleaned with
a mild soap or detergent and lukewarm
water by using a soft cloth or sponge. Do
not use abrasive or highly alkaline cleaners.
Never scrape with razor blades or other
sharp instruments. Benzene, leaded
gasoline, acetone or carbon tetrachloride
should never be used.
•
Do turn power off immediately and refer
servicing to qualified service personnel if
the underwater light does not operate
normally following the operating
instructions.