A41606-ENC, 60 6A User Manual
4
Copyright © 2011 by Astek Corporation. All rights reserved
90-000243-A
APRIL 29, 2016 VERSION A
This document describes Astek’s a41606-ENC, 60 6A design and will remain the official reference source
for all revisions/releases of this product until rescinded by an update.
To receive product literature, visit us at
http://www.astekcorp.com
.
DISCLAIMER
Astek Corporation reserves the right to make changes to any products herein at any time without notice.
Astek does not assume any responsibility or liability arising out of the application or use of any product
described herein, except as expressly agreed to in writing by Astek; nor does the purchase or use of a
product from Astek convey a license under any patent rights, copyrights, trademark rights, or any other of
the intellectual property rights of Astek or third parties. Astek products are not intended for use in critical
navigation, industrial control, nuclear power or life-support appliances, devices, or systems. Use of any
Astek product in such applications without written consent of the appropriate Astek officer is prohibited.
TECHNOLOGY LICENSES
The hardware and/or software described in this document are furnished under a license and may be used
or copied only in accordance with the terms of such license.
REGULATORY COMPLIANCE
Notice: FCC and CE testing is pending. This board is for ENGINEERING USE ONLY.
Note: The A34812-ITX has been designed to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These Limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in its installation. This equipment generates, uses, can radiate
radio frequency energy, and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. If this equipment does cause harmful interference the user
will be required to correct the interference.
The A41606-ENC 60 6A has been designed to meet the safety requirements of IEC/EN 60950-1.
COPYRIGHT NOTICE
Copyright © 2016 by Astek Corporation. All rights reserved.
TRADEMARK ACKNOWLEDGMENT
The Astek logo design is the trademark or registered trademark of Astek Corporation.