ASTECH LDS10A, User Manual, Page: 8 / 36

Safety Instructions LDS10A Manual
Page 8 ASTECH GmbH

Compliance with prescribed temperatures for operation/storage

Operation at correct voltage level

Application of specified signal levels to the appropriate data lines
2.3 Nonconforming use

Do not operate the LDS10A in any other way than described under
"Intended & Conforming Use" above and only in a proper working
condition

Safety devices must not be defeated or otherwise rendered
ineffective

Information and warning signs must not be removed

Repair work on the LDS10A must not be carried out by anyone
other than authorized personnel.

Avoid using the LDS10A without certified protection in an explosive
environment

Measurement with the LDS10A pointed at the sun or other strong
light sources may produce faulty results

Measurement of targets with poor surface reflectance in a strongly
reflecting environment may also result faulty measurements.

Measurement of strongly reflecting surfaces may deliver faulty
results.

Measurement performed through transparent optical media, for
example glass, optical filters, Plexiglas, etc. may equally produce
incorrect results.

Measurement on translucent objects (materials allow light to pass
through, but are not transparency, e.g. polystyrene, wax, different
plastics etc.) can give a too large measured value, since also light is
reflected by deeper layers

Rapidly changing measuring conditions are likely to falsify the result
of measurement