background image

INSTALLATION

CAUTION

Thank you very much for purchasing this TV. To enjoy your set to the full from the very beginning, read this manual 
carefully and keep it handy for ready reference.

Never tamper with any components inside the TV, or any other adjustment controls not mentioned in this manual. All 
LCD-TVs are high voltage instruments. When you clean up dust or  water drops on the LCD PANEL or CABINET, the 
power cord should be pulled out from the receptacle, then wipe the receiver with dried soft cloth. During thunder and 
lighting, unplug the power cord and antenna cord to prevent damage to  your TV. All repairs to this TV should only be 
performed by the TV service personnel.

PREFACE

Locate the TV in the room where light does not strike the screen 

.

Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for 
comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Avoid excessively warm locations to prevent possible damage to the cabinet or premature component failure.
This AC power can be connected to AC 100-240 volts. 50/60Hz.
Do not cover the ventilation openings when using the TV.

directly

-3-

Summary of Contents for LTV-3201






























Reviews: