background image

SureLock                           Model #: SLGDL-7

Automatic Garage Door Lock 

Thank You

 for purchasing the SureLock Model SLGDL-7. We appreciate your 

decision and want to make sure you are completely satisfied.  If for any reason 
you have questions during this process please do not hesitate to contact us:

PLEASE DO NOT RETURN SURELOCK TO THE STORE
First give us a chance to resolve ANY issues you may have. 
We are here and available to assist you.

SureLock Benefits / Features:

  ●Your AST SureLock model SLGDL-7, works with your garage door opener 
    to automatically lock your sectional roll-up garage door every time it's closed 
    and automatically unlock it when it's opened.
  ●Compatible with all residential garage door opener’s.
  ●Operates using your garage door opener’s existing remote controls, wall 
    switch/console and/or wireless keypad. (In short, SureLock provides added 
    security without changing the way you access your garage). 
  ●SureLock mounts on your garage door track inside of your garage and  
    can be mounted on either side. 
  

SureLock requires only 2" of clearance between door track and first 

    obstruction such as a wall/cabinet.
  ●"Peace of Mind Security".
    SureLock…protecting people and property from unnecessary risk. 
 

                 

This is where things get over simplified. To activate SureLock all you need 
to do is activate the garage door opener using your existing remote control, 
Wall switch/console or wireless keypad, this will simultaneously 
activate SureLock.
 

SureLock's lock bar retracts out of the track during the entire garage door 
open/close cycle. Then it automatically releases back into the track just above 
the roller wheel to lock the garage door when closed. It really is that simple.

Again, if for any reason things don't go this simple for you, please don't 
hesitate to contact us, see above for contact information.

           

Locate the red manual release lever on top of SureLock and shift it away 
from garage door track to manually unlock.
 

  Note:

 The SureLock will remain in the unlocked position until the 

             manual release lever is shifted back towards the track 
             (normal operating position). 

[email protected]
(800) 843-5625 ex.711
Mon – Fri, 8am to 5pm (Pacific Time)
Updates: SureLock4Homes.com

Operation and Installation Manual

        SureLock Operating Instructions

   SureLock Manual Release Instructions

[email protected] 
Mon - Fri, 8am to 5pm (Pacific Time) 
Updates: Garage-Lock.com

Summary of Contents for SureLock SLGDL-7













Reviews: