Copyright 2004-2005
TSA 6000-USB
Version 1.0
- 3 -
2. System Set-up
2.1 Packing List
•
TSA 6000-USB Signal Collection Unit
•
USB cable for connecting the TSA 6000-USB to your computer
•
AC adapter for powering your TSA 6000-USB
2.2 Software Installation
Make sure you have the following ready:
•
CD containing the TSA 6000 software.
•
A PC running Windows 95, 98, 2000, XP or NT4.
•
Internet Access to
www.tsa6000.com
Then:
•
Insert the TSA 6000 CD into your computer.
•
Follow on screen directions to install the TSA 6000 software
Note:
Your software will run for 5 days after installation before you must
register. If not registered, after 5 days, the software is disabled.
2.3 System Overview
The TSA 6000 test system includes two parts. The data capture is handled by
the TSA 6000 hardware. Data Analysis is handled by the TSA 6000 software
application.
Data Capture
The TSA Test device interfaces to a local telephone loop. It collects data
through dual 16-bit analog to digital converters and transfers it to a PC. The
TSA 6000 USB device has a USB connection and the TSA 6000 software
facilitates all control of the data capture via a dialog box on the PC.
Data Analysis
The TSA 6000 software displays and manipulates data graphically. There are
also functions to analyze files for the presence of telephony signals. Filters can
be applied to the data to remove single frequency interference tones from the
signals of interest.
Summary of Contents for Embedded System Products TSA6000-USB
Page 1: ...TSA6000 USBTM USER GUIDE ...
