Safety information
*The product is DC24V input, can only connect to the DC output of power supply.
*Powering the LED strip from 2 end by a unique power supply could reduce the voltage drop but can't use 2
different power supply
*Don’t overload the power supply unit.Usually most of the power supply has a efficiency between 80%-95%, so
when choosiing the power supply, the total watts of the strips should be smaller than 80% of the rate power of the
LED Strip Lights.
*Please use 24VDC isolated power supply to drive the led strip, and the constant voltage source ripple less than 5%. Can't
step-down the power by resistance-capacitance and nun-isolated power supply driver led strip, etc.
*The LED neon strip is DC low voltage input, can't connect to AC mains directly.
*Please don't light the LED Strip light before unreel, otherwise the product will overheat.
*Please clean the installation surface before attached the 3M type on.
*Please don't twist the strip light; hanging the light by power cable is not allowed; hanging the light by itself housing is not
allowed; step on the light is not allowed. folding the light is not allowed.
Applications
XIAMEN AST LIGHTING TECHNOLOGY CO., LTD
www.astlighting.com
4/4
