Associated Electrics RC10TC6.2, Assembly Manual

Page: 11 / 42

11
:: Suspension Arms Build - Bag D-DD - Step 4
:: Suspension Arms Build - Bag D-DD - Step 5
:: Suspension Arms Build - Bag D-DD - Step 6
Build two, one for
front, one for rear.
Both with 1 dot inserts
!
Front Droop
Setting: 6mm
Rear Droop
Setting: 5mm
Droop:
The standard settings of
6mm front and 5mm rear
will work best in most cases.
Droop is measured just
underneath the outer hinge
pin as shown in the photos
to the right.
On bumpy or low grip
surfaces, increase the droop
(going to a lower number on
the droop gauge), this will
help increase traction and
consistency.
Droop adjustments of
0.5mm to 1mm can be
very effective on the track!
1
0
2 3 4 5
6 7 8
1
0
2 3 4 5
6 7 8
x2
x2
x2
x2
x2
31541
M3x6mm
fhcs
31541
M3x6mm
fhcs
4617
Front
bulkhead
shim
(0.5mm)
4617
Front
bulkhead
shim
(0.5mm)
31620
TC6.2 arm
mount insert
(1 dot)
31618
TC6.2
Outer Arm
Mount
Arm Mount Inserts
Negative to the inside of vehicle.
Positive to the outside of vehicle.
1 DOT
0 °
-2 DOT
-1/2 °
+2 DOT
+1/2 ° -1 °
-3 DOT +3 DOT
+1 °