15
:: Wings / Electronics / Wheels Build - Bag 5.1, 5.2 - Step 7
:: Wings / Electronics / Wheels Build - Bag 5.1, 5.2 - Step 8
91560
FT Bearing
5x10x4mm
89216
M4 Locknut
91738
M4 Serrated
Locknut,
Flanged
x2
Tires/Wheels
not included!
Do not overtighten
front wheel nuts!
!
!
Painting Tips:
Your F6 does not come with a clear
polycarbonate body. You will need to prep the
body before you can paint it. Wash the inside
thoroughly with warm water and liquid
detergent. Dry the body using a clean, soft,
lint-free cloth.
RC cars get painted from the inside.
Using high quality masking tape, apply tape to
the inside of the body to create a design. Spray
(either rattle can or airbrush) the paint to the
inside of the body (prefferably dark colors first,
lighter colors last).
NOTE: use ONLY paint that is recommended
for use with (polycarbonate) plastics. If you
don’t, you can destroy the plastic body!!!!).
After painting, cut the body along the trim lines.
Make sure to drill or use a body reamer to make
the holes for the body mounts and antenna!
Summary of Contents for RC10F6
Page 1: ......