Associated Electrics RC10 SC5m, Manual

Page: 18 / 34

18
:: Tires and Body - Bag K - Step 8
:: Tires and Body - Bag K - Step 9
Painting Tips:
Your SC5M Team Kit comes with a clear
polycarbonate body. You will need to prep the body
before you can paint it. Wash the inside thoroughly
with warm water and liquid detergent. Dry the body
using a clean, soft, lint-free cloth. Use the supplied
window masks to cover the windows from the
INSIDE of the body (RC cars get painted from the
inside). Using high quality masking tape, apply tape to
the inside of the body to create a design. Spray
(use either rattle can or airbrush) the paint on the
inside of the body (prefferably dark colors first,
lighter colors last).
NOTE: ONLY use paint that is recommended for use
with (polycarbonate) plastics. If you do not, you can
destroy the plastic body!!!!.
After paint has completely dried, cut the body along
the trim lines. Make sure to drill or use a body reamer
to make the holes for the body mounts and antenna!
:: Tires and Body - Bag K - Step 7
Build 2 (1 left, 1 right) Build 2 (1 left, 1 right)
91148
M4 Locknut,
with flange
and knurl
91148
M4 Locknut,
with flange
and knurl
Build x4
Clean the tire and wheel
bead. Carefully apply CA
glue (tire adhesive) to the
tire bead on both sides.
Do one side at a time,
allow it to dry before
gluing the other side!
CA glue not included!
!
Tires / Inserts / Wheels
are not included!
#1597
ca glue
21173
Small
Body Clips
x4