18
:: Wheels / Tires and Body - Bag K - Step 4
:: Wheels / Tires and Body - Bag K - Step 5
Painting Tips:
Your B5M Factory Lite Team Kit comes with a clear
polycarbonate body. You will need to prep the body before
you can paint it. Wash the inside thoroughly with warm water
and liquid detergent. Dry the body using a clean, soft, lint-free
cloth. Use the supplied window masks to cover the windows
from the INSIDE of the body (RC cars get painted from the in-
side). Using high quality masking tape, apply tape to the inside
of the body to create a design. Spray (use either rattle can or
airbrush) the paint on the inside of the body (prefferably dark
colors first, lighter colors last).
NOTE: ONLY use paint that is recommended for use with
(polycarbonate) plastics. If you do not, you can destroy the
plastic body!!!!.
After paint has completely dried, cut the body along the trim
lines. Make sure to drill or use a body reamer to make the
holes for the
body mounts and antenna!
:: Wheels / Tires and Body - Bag K - Step 3
Racers Tip:
Instead of using the included body clips
(#21173), you can use hook and loop tape
on the inside of the body, and the sides of
the chassis to keep your body in place!
21173
Small
Body Clips
21173
Small
Body Clips
91537
Clear Body,
B5M
91531
Wing Angle
Shim
91471
Clear Wing,
B5
21173
Small
Body Clips
x2
x2
x2
91531
RC10B5M
Rear
Body Mounts
89222
M2.5 x 8mm
SHCS
x2
Body Trimming Options:
Cut Line A
Option 1) Cut on lines A and C for 3 gear layout.
Option 2) Cut on lines B and D for 4 gear layout.
Option 3) Cut on lines B and C for universal layout.
Cut Line B
Cut Line C
Cut Line D
Summary of Contents for RC10 B5m Factory Lite
Page 1: ......
