Asskea M20 Plus, Instruction Manual

Page: 52 / 68

18
ENGLISH
ON
Alternative disposable secretion canister sys-
tems and holders are available on request.
3.2.3 Suction tube
For the ASSKEA secretion aspirators MPlus-
series you can connect the suction tube with
the aspiration catheter using a fingertip.
3.3 Operation
3.3.1 Display and status LEDs
Fig. 14
Symbol Description Meaning of the display
LED illuminates permanently
green Power supply unit is connected; voltage available
LED blinks red Incorrect power supply unit is connected!
 Battery can not be charged!
LED illuminates permanently
green Battery capacity 100% to 40%
LED illuminates permanently
yellow Battery capacity < 40% to 10%
LED illuminates permanently
red Battery capacity < 10% to 0%, immediately plug in
the external power supply.
After completion of the aspiration procedure, turn
off the device for charging!
LED blinks green Battery is being charged!
LED blinks red Overtemperature protection, interruption of the
charging process until the temperature of the
battery is in the permissible range again.
LED illuminates permanently
green Pump is switched on.
LED blinks green Curbed operation (lower flow rate)
LED illuminates permanently
yellow Pump still runs for 5 minutes before the device
switches off.
LED blinks yellow Pump still runs for 5 minutes in curbed operation
(lower flow rate) before the device switches off.
LED blinks red; device is off After the automatic 40-minutes switch off the LED
will still blink for 30 seconds.