28
FEATURES/
FUNCTIONALITY
How automatic cut-off operates
The line-out modular jack on the base unit is for connecting your own telephone to a
telephone line. When you press the SOS button to activate an SOS call, the SOS call will
be prioritized to call out and any call currently being made using the line-out jack will be
disconnected so the SOS call can get a dial tone to call out.
Pendant LED status indicators
18
3
Pendant LED status indicators
Pendant LED indications see below:
Conditions
Pendant Light
BATTERY LED
RANGE LED
Turn On
Turn Off
Charging
Red
/
1 sec
1 sec
Full charge
Green
/
Always
/
Low power
Red
/
0.5 sec
2 sec
Make a call
/
Red
Always
/
Out of range
Red
/
0.5 sec
2 sec
Page Pendant
Red
/
0.5 sec
0.5 sec
LCD indicators:
If there is no back up battery installed, you will not see a battery icon on the base
display.
If there is a back up battery installed, the Battery icon will display on the base
display.
If the backup battery is full charged, battery icon on the base display will show
full.
The battery icon will
‘
cycle
’
F
u
ll
and
Empty
and
totally
disappear
during
normal
charging. This is a normal process of charging and discharging.
‘
Parallel
’
displayed
on
the
base
display
m
e
ans
that
a
telephone
on
the
s
a
m e line
has been picked up.
Connecting the Base Unit
1.
Place the base station on a stable surface location near the
telephone line jack and the electrical power outlet. (see
figure 1)
2.
Connect the telephone line and power cable to their
corresponding connectors at the back of the base station
marked LINE IN and DC IN. (see figure 2)
3.
Connect the other end of the telephone line and power cable
to their respective socket.
LCD indicators: (Battery Icon)
If there is no back up battery installed, you will not see a battery icon on the base
display.
If there is a back up battery installed, the Battery icon will display on the base display.
If the backup battery is full charged, battery icon on the base display will show full.
