record message keys
Turn on the GoTalk 9+ and you’ll hear
a beep! Press and release the record
button, the level LED (green) and the
record LED (red) will light. While it is
lit, press and release the message
key that you’re going to record on.
As you press the message key, the
record LED (red) blinks to indicate
it’s recording.
When you finish the message, press
any key to stop recording. Continue
to record each message or record the
entire level. When you’ve recorded all
your messages (or the entire level or
levels) press and release the
record button.
Play a message
Press and release a message key;
the green level light will blink. The
message you recorded will playback.
levels
To change level
, press and release
the change level button below
the green LEDs. The green LED
indicating the current level will blink.
Press again to change to another
level. Change the paper overlay to
correspond to the new level.
To erase level
, press and release
the record button on the back of
the device. Push the Change Level
button to the level you want to erase.
Insert a pen point or paper clip into
the pinhole (Erase Level) on back of
unit. This will erase the entire level.
Repeat steps above to erase other
levels. Erase level does not erase
core vocabulary words or phrases.
lock features
Eliminates unwanted use of
these buttons.
• Level Lock
—to activate level lock
follow these steps: Press and hold
down the record button on back of
the unit. The red record LED and
green level LED will turn on. While
still pressing the record button,
press and release the volume down
button. The record LED and the
level LED will turn off to show you
level lock is ON.
• Record Lock
—to activate the record
lock: Press and hold down the
record button on the back of the
unit. The red record LED and green
level LED will turn on. While still
pressing the record button, press
and release the volume up button.
The record LED and level LED will
turn off to show the record lock
is ON.
To UNDO
the record and level lock,
turn the unit off. While off, hold down
the record button and turn the unit
on. The green LED light turns on
and goes through each level and the
record LED goes on briefly
and beeps.
instructions
erase
level
RECORD
button
back view
on/off
switch
