Assistant AP-712, User Manual

Page: 30 / 36

Y O U R S U C C E S S I S O U R C O N C E R N !
.
р 5
CONNECTING TO PC AND TRANSFERING DATA
MEMORY CARD
Tips to extend battery life:
1. New battery will JHW its best condition after 2-3 full charging and discharging.
2. Streaming audio or video apps use a lot of battery life.
3. Disable wireless network positioning.
4. Switch off Wi-Fi if you’re not close to a strong Wi-Fi signal for extended periods
of time.
5. Use a quick screen timeout.
6. Reduce brightness to a comfortable level.
7. Widgets that access Web consume more power than widgets that do not.
Note:
Do not use other adaptors to charge the Tablet which can cause damage to
the battery.
When unit is connected to PC via USB cable, the USB-icon appears at the status
bar. S . elect USBconnected , then Turn on USB storage dialog appears.
Press OK.
To remove the tablet safely, tap Turn off USB storage .
Transferring contents from computer:
• To import contents into device, connect it to PC via supplied USB - cable.
• Upon successful connection to PC, turn to the device, touch and hold the USB
connection icon on status bar, drag downwards to display an ongoing list.
• Select USB connected , then press on Turn on USB storage to enter USB
mode and all operation will be halted.
• Go to [My Computer], double click on the device ’s disk to open.
• Perform normal file management oper ation like other USB device.
Insert the card correctly with the contact pin. Pushing the card in you should hear
a click when the card is seated correctly. You may damage card and the device
if M icroSD card is not inserted correctly. To remove M icro SD card push the card
once again until it clicks.
• When a M icro SD card is inserted in or ejected from the device it may take few
seconds for the device to update the content. Please avoid inserting or ejecting
card when other operation is running as this may cause the system hang.
• Do not remove the card if the content inside the card is being played. This will
halt the operation of the device and cause the device to restart.