S
m
ar
t H
om
e
19
Lock Module
Remove a battery from the
lock
The module is situated in the top left corner above the [P] button. It can be
unplugged by pulling it out.
Remove any of the batteries to cut power to the lock.
Remove inside cover
Slide up the black plastic cover of the lock on the inside of the door.
Remove the module
The model number will be on a sticker on the module, and will enable you to
find the current wireless compatibility of the lock.
Record module model number
The Yale Keyfree lock can have a removable wireless communication module within the lock. This module is
used for all wireless communications to both home automation systems and key fobs. In order to connect to
a home automation system a new module may be required for the lock, however changing the module has
the potential to disrupt the current wireless communications. For instance while a new module may allow
the lock to connect to a home automation system, it could cause the key fob to stop working. An up to date
list of compatible home automation systems and the corresponding lock modules is available at the following
address on the Yale website:
www.yale.co.uk/YaleEcosystem
Removing the module.
To find out which module is currently in your lock please follow the ‘removing a module’ instructions.
Step
Icon
Description
Smart Home
Inserting a Module
Remove a battery from the
lock
The module has 8 pins that are plugged into the small black connector above the
[P] button on the top left of the lock.
Remove any of the batteries to cut power to the lock.
Remove inside cover
Slide up the black plastic cover of the lock on the inside of the door.
Insert the module
Step
Icon
Description
Keyfree manual 2014-2_
.qxd 08/12/2015 10:18 am Page 19
