6
7
Essential Series
YDME 70
Essential Series
YDME 70
Door open operation
Touch the screen, the blue light on, sound with
"Welcome to use”
Operation
touch the screen
Use code or card
to open the door
Ways of opening:
Input the valid code ( has been enrolled)
Put the card ( had been enrolled) at the card
reading area.
If no incorrect operation, there will be a sound
"Beep" then you can press the handle to open
the door. If operate incorrectly, there will be a
sound " Please try again".
(1)
(2)
Turn the handle and
open the door
Operation note
Use of the override key
Press and push
to the right.
Use of the external 9V battery
For Low working voltage, or low battery and not able to change the new
battery, you can use the external 9 V battery to open the door.
Pull the panel cover
Connect the external 9 V battery
according to their electrode.
Install back the panel cover
after door open.
Change Battery
Steps
Use the socket screw wrench to loosen and take
off the copper loop. (Picture 1 Bellow)
Take off the battery cover. ( picture2, 3)
Take off the all old batteries
install with new ones
Place back the battery cove and tighten the copper loop.
1 Pay attention to the electrode when installing
the new batteries.
2.Do not mix the old ones with the new ones.
3.Please put the old batteries at the recycle
place to keep good environment.
.
1.
loosen and take off the copper loop.
Use the socket screw wrench to
2.
and the back lock cover.
Slightly pull the copper loop
3.
and the back lock cover.
Take off the copper loop
Remark:
Summary of Contents for Yale Essential YDME 70
Page 1: ...Essential Series YDME 70 ...
