An ASSA ABLOY Group brand
80-9086-0050-010 (10-12)
11
2
Minimize gap
between keypad
and escutcheon
by gently pushing
them together,
then tighten both
controller board
screws.
IV-E Installing the battery escutcheon and adjusting for appearance
Installing the Battery Escutcheon and
minimizing the clearance between the
Battery Escutcheon and the Small Rose
Escutcheon.
1. **Dry fit the Battery Escutcheon
to the Small Rose Escutcheon.
NOTE: IT IS VERY IMPORTANT TO KEEP
WIRES FROM GETTING PINCHED
WHILE ATTACHING BATTERY
COVER.
2. Check the clearance where
the two meet, see top picture. If
the clearance is acceptable tighten
the Battery Escutcheon screw.
3. If the clearance is too great
loosen the Small Rose Escutcheon
screw then push up and re-tighten the
screw. Recheck clearance.
If the clearance is still not acceptable
remove Battery Escutcheon and loosen
the two Controller Board screws and
adjust the controller board up or down.
Re-tighten controller board screws and
refer to step #2.
**Battery Escutcheon
Battery
Escutcheon
Screw
**Hook
** Battery Escutcheon has a machined
slot that engages the hook at the top of
the Controller Board prior to mating up
with Rose Escutcheon.
1
All Applications
Small Rose Escutcheon
and Screw
3
