11
ASSA ABLOY Hospitality
66 1100 005-11
2. Installation
2.1 Installation checklist
1. Mount the Allure items according to
2. Make all necessary connections of Allure items; see details in
3. Power up the Allure items.
4. Download data from the Visionline server to
Lock Service 3G
1
.
5. Set system ID in each lock
2
.
6. Initialize each lock with room number and also with parameters set up
in Visionline for each concerned lock
3
.
Note:
The initialization will also
set the time in the lock.
7. Configure each lock with applicable choices
4
(e.g. enable tamper switch,
set fail safe strike etc).
8. Snap the access panel onto the back frame and push done the
locking mechanism; see
.
9. Present a valid staff card at the access panel and make sure that
the door opens.
1)
See the section
Download data from server
in
Quick reference guide
Lock Service 3G
for details.
2)
See the section
Set system ID in lock
in
Quick reference guide Lock Service 3G
for details.
3)
See the section
Initialize lock
in
Quick reference guide Lock Service 3G
for details.
4)
See the section
Configure lock
in
Quick reference guide Lock Service 3G
for details.
