12/04/2016
- 8 -
Concept
Scroll completely down and click OK.
The TCP/IP – RS232 adaptor is now setup correctly in the network.
Now we must setup the virtual comport via the VCOM program.
See point 2.3.2
2.3.2
Now we can setup the virtual comport for the mini updater.
We click on COM Mapping and then we click on the ADD button.
First select the correct TCP/IP – RS232 adaptor we which to setup and then we give the comport its number and click OK.
Make sure that the comport number is in an higher range so interference with other comports in the system will not be a
problem. Make sure that the IT service of the client knows the comport number(s) used by the mini updaters.
They can confirm that these will not be in conflict with other systems on their PC/system or recommend another number(s).
Summary of Contents for SMARTair Mini Updater
Page 1: ...SMARTair Mini Updater...
