background image

 

Securitron Magnalock Corp. 

www.securitron.com 

ASSA ABLOY, the global leader 

 

 Tel 

800.624.5625 

[email protected] 

in door opening solutions

 

 

 

 

 

 

 
 

 

© Copyright, 2012, all rights reserved 

 

PN# 500-21400

 

 

Page 1  

Rev. C, 05/12 

 

INSTALLATION AND OPERATING INSTRUCTIONS 

For Model M38 and M68 Magnalocks 

(Versions “L”, “S” and “LS” with “D” and “T” Options) 

 

1.

 

INTRODUCTION 

Securitron’s Model M38 and M68 Magnalocks are fail safe electromagnetic locks designed for 
*interior use in areas which require controlled access or egress.  Each unit includes an 
interlocking mounting bracket and a power and control wiring access compartment which 
provides the added convenience of wiring “at-the-lock”.  The sleek, low-profile design provides a 

professional looking, unobtrusive integration into a wide range of architectural applications and 
can be easily retrofitted to replace existing magnetic lock systems. 
 
M38 and M68 Magnalocks are not designed, recommended or approved for exterior (outdoor) 
use. Interior use is described as any door installation to the interior of a building (i.e. offices, 

work or storage rooms) or to the interior side of any perimeter exterior door. 
 
2.

 

SPECIFICATIONS 

M38: M68: 
Holding Force: 600 Lbs. [272 Kg] 

Holding Force: 1,200 Lbs. [544 Kg] 

Dimensions: 

 Inches:  10-1/2”L X 2-9/16”H X 1-9/16”D 
 Millimeters:  267 L X 65 H X 40 D 

Dimensions: 

 Inches:  10-1/2”L X 3-5/8”H X 1-13/16”D 
 Millimeters:  267 L X 92 H X 46 D 

Electrical: 

 12 Volts DC: 

   Current Requirement: 300 – 325 mA 
   Power Consumption: 3.6 Watts 

 24 Volts DC: 

   Current Requirement: 150 – 175 mA 
   Power Consumption: 3.6 Watts 

Electrical: 

 12 Volts DC: 
   Current Requirement: 250 – 275 mA 
   Power Consumption: 3.0 Watts 
 24 Volts DC: 

   Current Requirement: 125 -150 mA 

   Power Consumption: 3.0 Watts 

 
3.

 

PRODUCT OVERVIEW 

Upon unpacking this product, an inventory should be made to ensure that all the required 
components and hardware have been included.  Along with these instructions and the 
installation template, the lock assembly (M38 Shown) should include the following items: 

 

 

Mounting Bracket 

Sex Bolt 

Hardware Pack 

Strike Plate 

Magnetic Lock 

Housing 

Summary of Contents for Securitron M38 Series















Reviews: