Description
The AQE line of Power over Ethernet (PoE) MidSpan
Injectors are available at 15.5 watts (W) and 30W in
accordance with the requirements in the Institute of
Electrical and Electronics Engineers (IEEE) Standard 802.3,
"Ethernet."
The AQE line of MidSpan Injectors provides PoE compli-
ant power to PoE compatible devices such as Internet
Protocol (IP) cameras, infrared (IR) illuminators, ac-
cess control panels and readers, or to non-PoE de-
vices using a PoE Extractor such as the AQE30E.
Regulatory Information
The equipment discussed within this manual has been tested
to the following standards:
•
UL Standard UL294b, "The Standard of Safety for
Access Control System Units"
•
International Electrotechnical Commission (IEC)
and UL Standard IEC/UL 60950-1, "Components"
•
Canadian Standards Association Standard C22.2
No. 205-M1983, "Signal Equipment"
Mounting the AQE Series Module
The AQE line of Midspan Injectors mount using two screws
in the mounting tabs. The unit must be mounted in a
secure, indoor, dry location to a suitable surface, using
suitable hardware.
Data
PoE/Data
Port Status
24V AC/DC
Input
PoE
Shutdown
#6 Diameter
3.85”
Specifi cations
AQE15
AQE30
Input Voltage
24 volts (V) Alternating Current (AC) or
24V Direct Current (DC) ±15%
24 VAC or 24 VDC ±15%
Input Current
1.4 Amperes (A) Maximum (Max) AC or
DC
2.6A Max AC or DC
Output Power
15.4W (IEEE802.3af)
30W (IEEE802.3at)
Output Voltage
50 VDC
50 VDC
Output Current
300 mA
600 mA
Shutdown Terminals
5–24 VDC @ 10 mA Max
5–24 VDC @ 10 mA Max
Data Cable Length
328 feet (ft) or 100 meters (m) Max
328 ft (100 m) Max
Data Rate
10/100 Base-T
10/100/1000 Base-T
ESD Immunity
8 kilovolts (kV)
8 kV
PoE Pin Assignment
Positive (VCC+):
Pins 4, 5
Positive (VCC+):
Pins 4, 5
Negative (VCC–): Pins 7, 8
Negative (VCC–): Pins 7, 8
Data:
Pins 1, 2, 3, 6
Data:
Pins 1, 2, 3, 4, 5, 6, 7
Operating Ambient Temperature
0 to 49°C, Indoor Dry Locations
0 to 49°C, Indoor Dry Locations
Storage Temperature
–20 to +70°C
–20 to +70°C
Operating Humidity
5 to 95% (Non-Condensing)
5 to 95% (Non-Condensing)
Size
4.20" L x 2.50" W x 1.20" D
(107mm L x 64mm W x 31mm D)
4.20" L x 2.50" W x 1.20" D
(107mm L x 64mm W x 31mm D)
Weight
0.25 pounds (lb) or 0.11 kilograms (kG) 0.30 lb (0.14 kG)
AQE15 and AQE30
Power over Ethernet Midspan Injector
Installation Manual
500-33605, Rev A
