10
1-800-727-5477 • www.sargentlock.com
A7807D 12/22
Passport 1000 PG
Mortise Lock
Copyright © 2012, 2022, SARGENT Manufacturing Company. All rights reserved.
Reproduction in whole or in part without the express written permission of SARGENT Manufacturing
Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
Installation Instructions - Installation of Lock Body
8
1. Insert lock body into mortised cutout (Figure 8).
2. Connector and wires must be coiled within
retaining ring in cylinder hole.
3. Push cable and connector through perforated
sticker* on non-cylinder side of hole.
*Note: If hand of lock body has changed, sticker will
have been removed (see previous 2).
4. Hold lock body loosely in place with (2) lock
body screws.
Note: Do not completely tighten screws at this
time.
Mortise lock body
connector and
grounding lug
(2) #12-24 x 1/2"
Flat Head Screws
(Metal Doors)
(2) #12 x 1-1/4”
Flat Head Screws
(Metal Doors)
Installation Instructions - Installation of Outside & Inside Lever
Assembly Lock Body
9
Align through bolt posts on outside lever assembly with door prepped holes (Figure 9).
Mortise Lock Body
Connector and Ground Ring
Terminal
Inside Adapter Plate
Rose
Set Screw
Outside Lever
Assembly
Figure 8
Figure 9
1. Slide the outside lever assembly with
spindle though the door and lock
body.
2. Secure lever assembly with the inside
adapter plate with (2) screws:
DO NOT TIGHTEN.
3. Securely tighten the lock body
screws on edge of door.
4. Securely tighten both inside adapter
screws.
5. Place rose over inside adapter and
tighten clockwise.
6. Fasten inside lever to inside adapter
and tighten lever set screw snugly.
Summary of Contents for Sargent Passport 1000 PG
Page 24: ...A7807D 12 22...
