1-800-810-WIRE • www.sargentlock.com • A8185A 8
Copyright © 2016, Sargen
t Manufacturing Company
, an A
SS
A AB
LO
Y G
roup company
. All right
s reser
ved
.
Reproductions in whole or in par
t without express writ
ten permission of Sargen
t Manufacturing Company is prohibited
.
04/30/16
IN120 Exit Device
Wood doors have 3/8” raceway to controller cutout and metal doors
have 3/4” raceway to the controller cutout.
Refer to template A8214.
1. Insert connector end of DPS through the raceway on the latch edge of
the door (Fig. 2A).
Note: For metal doors, use DPS Collar.
2. Push DPS firmly into place by hand.
IMPORTANT
: DO NOT TAP SWITCH WITH ANY TOOL.
DPS
(Door Position
Switch)
Collar is used only
with metal doors
DPS
(Door Position
Switch)
2 Install Door Position Switch (DPS)