Copyright © 2017, Sargent Manufacturing Company
, an ASSA ABLOY Group company
. All rights reser
ved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
06/30/17
Harmony Series H2 Mortise Lock
A8027G • 800-810-WIRE (9473) • www.sargentlock.com
16
4. Position green/yellow ground wire ring terminal (from lock body)
over hole for top left screw (Fig. 9F, G).
5. Position green/yellow reader harness earth ground on top of ground ring
and thread both with (1) 8-32 x 3/8” Phillips flat head undercut combo
screw (Fig. 9F, G).
IMPORTANT: Note orientation of ground ring terminals in Fig. 9F-H
6. Tighten securely.
1. Once wires are arranged, position controller at a rotated angle against the
door,
under
the earth ground wire.
2. Press piece against door while turning clockwise (Fig. 9E).
3. Twist into place, perpendicular with door (Fig. 9F).
Install Controller
Inside of
Door
Rotate Clockwise
Fig. 9E
(2) 8-32 x 3/8” Phillips
Flat Head Undercut
Combo Screw
Fig. 9G
Fig. 9H
Fig. 9F
Please follow these steps prior to installing inside escutcheon to prevent
any damage caused by pinching wires:
