ISW73ER Rev 1 10/21
Copyright © 2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
5
Model W73ER,
Wood Frame
D. Assemble track.
1. Slide track components into track.
(Figure 5)
NOTE:
• All track components must be placed in track
before installing track into door.
• Insert slider into track first.
• Stop block (or optional hold open) should be
last component at hinge side of door.
• The longer end of slider should be pointed
towards hinge side of door.
Non Hold Open Track Components
Optional Hold Open Track Components
Slider
Slider
Figure 5
Installation
OR
E. Install track to door.
1.
Make sure slider and track components
are installed prior to installing track to
door. See Step C.
2.
Install track into top of door using
either four (4) 1/4-20 x 7/16" machine
screws for metal doors or four (4)
#14 x 1-1/4" wood screws for wood
doors. (Figure 6).
NOTE: If necessary, use optional
retrofit spacer (replacement
application only, consult factory).
Optional
Retrofit Track
Spacer
1/4-20 x 7/16 FHPMS (4 each)
or 14 x 1-1/4 FHPWS (4 each)
Hinge
Side
Figure 6
Approved 2021-10-20
