CAUTION! Incorrect supply voltage may cause damage not covered by warranty.
Please check supply voltage with a suitable meter to ensure it is within 10-13.8V DC.
Current required is 250mA @ 12V DC
DO NOT OIL OR LUBRICATE.
(10-13.8V DC)
250mA
Fig. 3 - Electrical Schematic
Red
Power (+)
Ground (-)
The installation of a Latch guard is recommended on outward opening
external doors.
ASSA ABLOY Australia Pty Limited, 235 Huntingdale Rd, Oakleigh, VIC 3166 ABN 90 086 451 907 ©2015
An ASSA ABLOY Group brand
• For metal door frames, fit door mounting brackets.
• Once door frame preparation is complete, temporarily fit strike into
door frame to check for interference. Check that the door closes
smoothly and that the latch extends fully past the strike keeper.
• When strike operates correctly with latch, remove strike from
mortice and connect wiring.
Door mounting bracket
• Refit strike and secure, making sure no wires are being crushed.
• Check both mechanical and electronic operation works correctly.
TUBULAR LATCH OPERATION
To ensure deadlatching, ensure
that the deadlatching pin is
depresed by the edge of the
keeper when the door is closed.
Keeper
edge
Deadlatching
pin
ASSEMBLING STRIKE
ELECTRICAL SPECIFICATION
CHECKING FUNCTION
Metal Door Frame
Timber Door Frame
