Lock/Unlock
mode
(Locked position)
0
Passage
mode
Lock
side
Lock
side
Cylinder Function Setting Positions
Lock/Unlock
mode
(Unlocked position)
Retracts latch
by key or turn
Lock/Unlock
mode
(Locked position)
0
Passage
mode
Lock/Unlock
mode
(Unlocked position)
Retracts latch
by key or turn
SETTING OF HUB FUNCTION
SETTING OF CYLINDER FUNCTION
1
2
3
TURN KNOB ADAPTORS (If required)
3P80 SERIES MORTICE LOCK
MOUNTING INSTRUCTIONS
CONTENTS
TOOLS REQUIRED
Please ensure that all necessary safety precautions are
undertaken when installing this lockset.
Part No.
Function
3P82TSS-A11E
3P82TSS-E11E
3P82SS-E23E
3P82TSS-E21E
3P82SS-E11E
3P82VSS-E11E
3P82SS-C11D
3P82SS-C21E
3P82SS-C11E
3P72-STA01
3P72-STA01
N/A
3P72-STA01
N/A
3P72-VTA01
N/A
N/A
N/A
A
E
E
E
E
E
C
C
C
SETTING OF LOCK FUNCTION
Fully loosen screw to free hub
selection disc. (Screw will be
retained)
Rotate disc to desired position.
Retighten screw.
(Note: Do
not use power driver for this
application.)
Establish functional operation
for the required side of the
door.
1.
Escape (Left side) - Left side handle set to Escape
Escape (Right side) - Right side handle set to Escape
C
A
A
E
E
Combination – both handles lockable
A
NTI-LOCKOUT -
‘A’
C
OMBINATION
E
SCAPE SIDE
A
NTI-LOCKOUT
E
SCAPE SIDE
‘C’
C
OMBINATION -
A
NTI-LOCKOUT
C
OMBINATION
E
SCAPE SIDE -
‘E’
Function setting
tool (supplied)
Indicator Hole
Establish the cylinder function
required on each side of the lock.
Use the Function setting tool
to set the desired position on
each side
of the lock.
Feel for
2 ‘clicks’
and ensure the
indicator hole and marks are
aligned.
Cylinder retaining pin
If resetting is required, insert
cylinder retaining pin into
‘RESET’ hole and set to required
position.
Remove cylinder retaining pin.
RESETTING OF CYLINDER
FUNCTION
INSTALLATION OF STANDARD
TURN ADAPTOR
Install turn adaptor to inside of
lockset, ensuring cam is engaged.
Insert retainer pin to secure
adaptor in lock.
Ensure lock is in Position 1 and
both sides are in the
UNLOCKED
mode.
Install Emergency turnknob
adaptor (
) into
the
side of lock as shown only
.
Ensure through slot is vertical
when in UNLOCKED mode.
Insert retainer pin to secure
adaptor in lock.
EMERGENCY TURN ADAPTOR
3P72-ETA01
Anti-lockout (Left side) - Left side handle set to Anti-lockout
Anti-lockout (Right side) - Right side handle set to Anti-lockout
HAND OF DOOR ACCORDING TO ENGLISH PRACTICE
OUTSIDE
INSIDE
RIGHT
HAND
LOCK
DOOR OPENING OUT
DOOR OPENING IN
OUTSIDE
INSIDE
RIGHT
HAND
LOCK
LEFT
HAND
LOCK
LEFT
HAND
LOCK
P/No. 3B80-121 30621 0711
For a full list of all functions visit
or contact 1300 LOCK UP (1300 562 587)
lockweb.com.au
Turn
Adaptor
Hub
Setting
Outside
Setting
Inside
Setting
Escape Office Lock - Anti-lockout
Escape Office Lock
Storeroom Lock
Entry Door Lock
Classroom Lock
Anti-Vandal Classroom Lock
Double Cylinder Glass Door Lock
Glass Entry Door Lock
Single Cylinder Glass Door Lock
Outside - Handle locked/unlocked. Key locks/unlocks.
Inside - Handle always free.
Old P/No. 3582WA#SC
Old P/No. 3582WT#SC
Old P/No. 3582X-#SC
Old P/No. 3582XT#SC
Old P/No. 3582Z-#SC
Old P/No. 3584ZZ#SC
Old P/No. 3584XZ#SC
Old P/No. 3584Z-#SC
Outside - Handle rigid. Key retracts latch.
Inside - Handle always free.
Outside - Handle locked/unlocked. Key retracts latch.
Inside - Handle always free. Turn locks/unlocks outside.
Outside - Handle locked/unlocked. Key locks/unlocks.
Inside - Handle always free. Turn locks/unlocks.
Outside - Handle locked/unlocked.
Inside - Handle always free. Turn locks/unlocks.
Outside - Handle locked/unlocked. Key locks/unlocks/retracts latch.
Inside - Handle always free.
Outside - Handle locked/unlocked. Key retracts latch.
Inside - Handle locked/unlocked. Key locks/unlocks.
Outside - Handle locked/unlocked. Key retracts latch.
Inside - Handle locked/unlocked.
‘Click, Click’
# - Denotes Left (L) or Right (R) lockset
2.
1.
EMERGENCY
Turn Adaptor
THIS SIDE OF
LOCK ONLY
2.
3.
Electric drill
Ø3, 4.5, 10, & 19mm drill bits
Router or compass Saw
File
Phillips head screwdriver
Ruler / Measuring tape
Pencil
Cylinder retaining pin (x2)
M4 x 8 screw (x9)
Function setting tool
Instructions
3P80 series mortice lock
Cover plate
Strike
Strike box
Spindle (x2)
Spindle spring (x2)
Outside - Handle locked/unlocked. Key locks/unlocks.
Inside - Handle locked/unlocked. Key locks/unlocks.
Anti-lockout
- Retracting the bolt by inside lever handle, key or closing the
door will ‘kick-off’ the locking feature, and unlock outside lever handle.
To reset Hub Function -
The Cylinder Function Position must be at ‘
0
', ‘
I
’ or ‘
II
’,
see Section 2 for setting of Cylinder Function.
3P72-STA01
Standard (T)
3P72-VTA01
Anti-Vandal (V)
3P72-ETA01
Emergency (E)
