ASSA ABLOY Australia Pty Limited, 235 Huntingdale Rd, Oakleigh, VIC 3166 ABN 90 086 451 907 ©2016
Keeper
edge
The installation of a latch guard is recommended on outward opening
external doors.
• For metal door frames fit door mounting brackets.
• Once door frame preparation is compelte, temporarily fit strike into
door frame to check for interference. Check that the door closes
smoothly and that the latch extends past the strike keeper.
• When strike operates correctly with latch, remove strike from
mortice and connect wiring.
• Refit strike and secure, making sure no wires are being crushed.
• Check both mechanical and electronic operation works correctly.
Deadlatching
pin
TUBULAR LATCH OPERATION
To ensure deadlatching, ensure
that the deadlatching pin is
depresed by the edge of the
keeper when the door is closed.
An ASSA ABLOY Group brand
ELECTRICAL SPECIFICATION
CHECKING FUNCTION
ASSEMBLING STRIKE
CAUTION! - Incorrect supply voltage may cause damage not covered by warranty.
Please check supply voltage with a suitable meter to ensure it is within ± 15% of the nominal
voltage shown above with the strike powered.
DO NOT OIL OR LUBRICATE
24V DC 125mA
12V DC 250mA
Blue
Red
Black
White
Blue
Red
White
Black
•
• •
•
•
•
•
•
Blue and Black to Power Supply.
Red and White joined together.
Red and Black joined and to Power Supply.
Blue and White joined and to Power Supply.
•
•
15mm Extension Lip
P/No. 220110 - 502
25mm Extension Lip
P/No. 220110 - 503
50mm Extension Lip
P/No. 220110 - 504
Status Approved 2016-03-24
