10
DE
Intended use
Electrical locking devices on doors along escape routes are intended for use in
commercial applications.
The escape door system is equipped with
ePED
®
escape route technology
. The
connection to the
1386CMC central escape route control system
(manual
D01117xx
ePED
®
1386CMC central escape route control system
) via Ethernet takes place with
an
ePED
®
CMC connector 1386CMC-CON
at every escape door, with the following
limits:
· a
1386CMC central escape route control
can control a maximum of 128 escape
doors via
128 CMC connectors 1386CMC-CON
,
And
· one escape door can be controlled by no more than 32 1386CMC central es-
cape route control systems via a 1386CMC-CON CMC connector.
The product has been designed for safeguarding escape routes and has been
tested to the requirements specified in the German guidelines on electrical
locking systems for doors in escape routes (EltVTR). Deviating uses or device
combinations not described are not permitted.
ASSA ABLOY Sicherheitstechnik GmbH
can provide the necessary planning informa-
tion for approved solutions and the device combinations required for your
application.
The security functions for the release of the electrical locking meet the require-
ment for fail-safe functionality in DIN EN 13637:2015, “safety integrity level” SIL 2
of the IEC 61508:2010 parts 1 to 7 (reference: technical data).
Compliance with all relevant inspection authority requirements is mandatory for
use, particularly with respect to the
· coordination of the safety concept with the responsible inspection authority
and
· modifications of door elements.
The device is suitable for installation, configuration and use, according to these
instructions. Any use beyond this is deemed as non-intended use; device
combinations which are not described are not permitted.
