STEP 1: Latch Installation
Position plate insert in 2-1/8” bore
Insert latch through 1” bore
For privacy function make sure threaded
piece on latch is towards the inside of
the door
Snap latch into plate insert
Install (2) #8 combination screws to
secure latch
Do not fully tighten
STEP 2: Determine Orientation of Trim
Remove the chassis which is packed with the paddle and cover
Passage trim can be mounted vertically or horizontally
Privacy trim can only be mounted vertically
Position chassis and verify the spindle engages into the latch hubs
Cams on chassis must be oriented as shown (vertical orientation for vertical
mounting and horizontal orientation for horizontal mounting)
Vertical
Horizontal
Cams must be oriented as shown
ASSA ABLOY, the global leader in door opening solutions
Copyright © 2011, Corbin Russwin, Inc., an ASSA ABLOY Group Company.
All rights reserved. Reproduction in whole or in part without the express
written permission of Corbin Russwin, Inc. is prohibited.
