English
24
Power LED and Speaker
Header
(7-pin SPK_PLED1)
(see p.1, No. 11)
Please connect the
chassis power LED and
the chassis speaker to this
header.
Serial ATA3 Connectors
(SATA_0_1:
see p.1, No. 9)
(SATA_2_3:
see p.1, No. 8)
(SATA_4_5:
see p.1, No. 7)
These six SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
* If M2_1 is occupied by
a SATA-type M.2 device,
SATA_5 will be disabled.
* If M2_2 is occupied by
a SATA-type M.2 device,
SATA_0 will be disabled.
USB 2.0 Headers
(9-pin USB_1_2
(see p.1, No. 14)
(9-pin USB_3_4)
(see p.1, No. 15)
(9-pin USB_5)
(see p.1, No. 17)
There are three headers
on this motherboard.
Each USB 2.0 header can
support two ports.
USB 3.0 Header
(19-pin USB3_5_6)
(see p.1, No. 6)
There is one header on
this motherboard. Each
USB 3.0 header can
support two ports.
1
+5V
DUMMY
PLED+
PLED+
PLED-
DUMMY
SPEAKER
DUMMY
GND
GND
P+
P-
USB_PWR
P+
P-
USB_PWR
1
1
In
Dummy
IntA_PB_D-
GND
IntA_
GND
IntA_PB_SSTX-
IntA_
IntA_PB_SSRX-
Vbus
Vbus
Vbus
IntA_PA_SSRX-
IntA_
GND
IntA_PA_SSTX-
IntA_
GND
IntA_PA_D-
In
SA
TA_0
SA
TA_1
SA
TA_2
SA
TA_3
SA
TA_4
SA
TA_5
1
USB_PWR
P- P+
GND
