ASROCK X58 SUPERCOMPUTER -, Installation Manual

Page: 24 / 194

2 4 2 4
2 4 2 4 2 4
ASRock X58 SuperComputer Motherboard
EnglishEnglishEnglishEnglishEnglish
ASRock XFire_Bridge_3S Card
Step 3. Connect the DVI monitor cable to the DVI connector on the Radeon graphics
card on PCIE1 slot. (You may use the DVI to D-Sub adapter to convert the DVI
connector to D-Sub interface, and then connect the D-Sub monitor cable to the
DVI to D-Sub adapter.)
2.6.1.2 Installing Four CrossFireX 2.6.1.2 Installing Four CrossFireX
2.6.1.2 Installing Four CrossFireX 2.6.1.2 Installing Four CrossFireX
2.6.1.2 Installing Four CrossFireX
TM TM TM TM TM
-Ready Graphics -Ready Graphics
-Ready Graphics -Ready Graphics
-Ready Graphics
Cards Cards Cards Cards Cards
Step 1. Insert Radeon graphics cards into PCIE1, PCIE2, PCIE3 and PCIE4 slots.
Make sure that the cards are properly seated on the slots.
Step 2. Use one CrossFireX TM Bridge to connect Radeon graphics cards on PCIE1
and PCIE2 slots, use another CrossFireX
TM
Bridge to connect Radeon graph-
ics cards on PCIE3 and PCIE4 slots, and use the other CrossFireX
TM
Bridge to
connect Radeon graphics cards on PCIE2 and PCIE3 slots. (CrossFireX
TM
Bridge is provided with the graphics card you purchase, not bundled with this
motherboard. Please refer to your graphics card vendor for details.)
CrossFireX TM Bridge
Step 2. Connect two Radeon graphics cards by installing ASRock XFire_Bridge_3S
Card on ASRock XFire_Bridge_3S Card Interconnects on the top of Radeon
graphics cards. (If there are two gold fingers on each Radeon graphics card,
please use two ASRock XFire_Bridge_3S Cards to connect two Radeon graphics
cards.)