ASROCK X470 Master SLI, Manual

Page: 45 / 201

41
English
X470 Master SLI/ac / X470 Master SLI
Step 3
Move the standoff based on the
module type and length.
The standoff is placed at the nut
location D by default. Skip Step 3 and
4 and go straight to Step
5 if you are
going to use the default nut.
Otherwise, release the standoff by
hand.
B C D A
Step 4
Peel off the yellow protecti ve film on
the nut to be used. Hand tighten the
standoff into the desired nut location
on the motherboard.
Step 5
Gently insert the M.2 (NGFF) SSD
module into the M.2 slot. Please
be aware that the M.2 (NGFF) SSD
module only fits in one orientation.
NUT1 NUT2
D
Step 6
Tighten the screw with a screwdriver
to secure the module into place.
Please do not overtighten the screw as
this might damage the module.
B C D A