ASROCK X300TM-ITX, Manual

Page: 27 / 146

English
25
X300TM-ITX
Step 4
Move the standoff based on the
module type and length.
The standoff is placed at the nut
location A by default. Skip Step 4 and
5 and go straight to Step
6 if you are
going to use the default nut.
Otherwise, release the standoff by
hand.
B
A
Step 5
Peel off the yellow protective film on
the nut to be used. Hand tighten the
standoff into the desired nut location
on the motherboard.
A B
A B
20
o
Step 6
Align and gently insert the M.2
(NGFF) SSD module into the M.2
slot. Please be aware that the M.2
(NGFF) SSD module only fits in one
orientation.
NUT1 NUT2
B
Step 7
Tighten the screw with a
screwdriver to secure the
module into place. Please do
not overtighten the screw as
this might damage the module.
B A