background image

57

3.6 Boot Screen

In this section, it will display the available devices on your system for you to con  g-
ure the boot settings and the boot priority. 

Boot Option Priorities

Boot Option #1

Set the   rst priority of the system boot device.

Hard Drive BBS Priorities

Set the order of the legacy devices in this group.

Setup Prompt Timeout

This shows the number of seconds to wait for setup activation key. 
65535(0XFFFF) means inde  nite waiting.

Bootup Num-Lock

If this item is set to [On], it will automatically activate the Numeric Lock 
function after boot-up.

Full Screen Logo

Use this item to enable or disable OEM Logo. The default value is 
[Enabled].

AddOn ROM Display 

Use this option to adjust AddOn ROM Display. If you enable the option
“Full Screen Logo” but you want to see the AddOn ROM information
when the system boots, please select [Enabled]. Con  guration options:
[Enabled] and [Disabled]. The default value is [Enabled].

Boot From Onboard LAN

Use this item to enable or disable the Boot From Onboard LAN feature.

Boot Failure Guard

Enable or disable the feature of Boot Failure Guard.

Boot Failure Guard Count

Enable or disable the feature of Boot Failure Guard Count.

Summary of Contents for P67 TRANSFORMER -






























































Reviews: