ASROCK P67 EXTREME6 - User Manual Download Page 50

Page: 50 / 83

2.15 Serial ATA3 (SATA3) Hard Disks Installation

This motherboard adopts Intel

P67 chipset that supports Serial ATA3 (SATA3) hard

disks and RAID (RAID 0, RAID 1, RAID 10, RAID 5 and Intel Rapid Storage)

functions for SATA3_0 and SATA3_1 connectors. It also adopts Marvell SE9120

chipset that supports Serial ATA3 (SATA3) hard disks for SATA3_M1, SATA3_M2,

SATA3_M3 and SATA3_M4 connectors. You may install SATA3 hard disks on this

motherboard for internal storage devices. This section will guide you to install the

SATA3 hard disks.

STEP 1: Install the SATA3 hard disks into the drive bays of your chassis.

STEP 2: Connect the SATA power cable to the SATA3 hard disk.

STEP 3: Connect one end of the SATA data cable to the motherboard’s SATA3 con-

nector.

STEP 4: Connect the other end of the SATA data cable to the SATA3 hard disk.

Please be noted that SATA3_M1, SATA3_M2, SATA3_M3 and SATA3_M4

do not support RAID function. If you want to use RAID function on SATA3

connectors, please use SATA3_0 and SATA3_1 connectors.

Summary of Contents for P67 EXTREME6 -




















































































Search results

Summary of Contents for P67 EXTREME6 -

Reviews:

Related manuals for P67 EXTREME6 -

Brands by name

Popular brands

ASROCK P67 EXTREME6 -, User Manual

Search results

Summary of Contents for P67 EXTREME6 -

Reviews:

Related manuals for P67 EXTREME6 -

Brands by name

Popular brands