4 5
4 5
4 5
4 5
4 5
3.3
3.3
3.3
3.3
3.3 OC T
OC T
OC T
OC T
OC Tweak
weak
weak
weak
weaker Screen
er Screen
er Screen
er Screen
er Screen
In the OC Tweaker screen, you can set up overclocking features.
BIOS SETUP UTILITY
Main
Advanced
H/W Monitor
Boot
Security
Exit
Overclocking may cause
damage to your CPU and
motherboard.
It should be done at
your own risk and
expense.
Select Screen
Select Item
Enter Go to Sub Screen
F1
General Help
F9
Load Defaults
F10
Save and Exit
ESC
Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
OC Tweaker
OC Tweaker Settings
Load CPU EZ OC Setting
[Press Enter]
BCLK Frequency (MHz)
PCIE Frequency (MHz)
Overclock Mode
[133]
[100]
[Auto]
Boot Failure Guard
Spread Spectrum
[Enabled]
[Auto]
DRAM Timing Control
22
4.800GT
DDR3_1333
ASRock VDrop Control
[With VDrop]
Load Memory EZ OC Setting
Intelligent Energy Saver
Good Night LED
[Press Enter]
[Disabled]
[Disabled]
CPU Ratio Setting
QPI Frequency
DRAM Frequency
[Auto]
[Auto]
[Auto]
Load CPU EZ OC Setting
You can use this option to load CPU EZ overclocking setting. Configuration
options: [3.60GHz], [3.70GHz], [3.80GHz], [3.90GHz], [4.00GHz] and
[4.20GHz]. Please note that overclocing may cause damage to your CPU
and motherboard. It should be done at your own risk and expense.
Load Memory EZ OC Setting
You can use this option to load memory EZ overclocking setting. Configu-
ration options: [DDR3 1866], [DDR3 2000], [DDR3 2200] and [DDR3 2400].
Please note that overclocing may cause damage to your memory modules
and motherboard. It should be done at your own risk and expense.
Intelligent Energy Saver
Intelligent Energy Saver is a revolutionary technology that delivers
unparalleled power savings. The default value is [Disabled]. Configuration
options: [Auto], [Enabled] and [Disabled]. If you want to enable this function,
please set this item to [Enabled]. Besides the BIOS option, you can also
choose our Intelligent Energy Saver utility to enable this function.
Good Night LED
Enable this option to turn off Power LED, Lan LED and Port80 LED when the
system is power on. The keyboard LED will also be turned off in S1, S3 and
S4 state. The default value is [Disabled].
Overclock Mode
Use this to select Overclock Mode. Configuration options: [Auto], [Manual],
[I.O.T.] and [Optimized]. The default value is [Auto]. If you select [Manual],
Untied Overclocking function is enabled. Please refer to page 42 for the
details of Untied Overclocking Technology. Therefore, you are allowed to
adjust the Host frequency and PCIE frequency in the following two items.
