6 6
6 6
6 6
6 6
6 6
BIOS SETUP UTILITY
Storage Configuration
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Advanced
SATAII Operation Mode
SATAII_1
SATAII_2
SATAII_3
SATAII_4
SATAII_5
SATAII_6
eSATAII
IDE1 Master
IDE1 Slave
[IDE]
[Hard Disk]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
Select Screen
Select Item
+-
Change Option
F1
General Help
F9
Load Defaults
F10
Save and Exit
ESC
Exit
Select Screen
Select Item
+-
Change Option
F1
General Help
F9
Load Defaults
F10
Save and Exit
ESC
Exit
SATAII 1,2,3,4 Configuration
SATAII 5,6 Configuration
[Compatible]
[Enhanced]
[Enabled]
[IDE]
IDE
RAID
AHCI
Disabled
Options
Onboard eSATAII & IDE
eSATAII Operation Mode
3.4.4
3.4.4
3.4.4
3.4.4
3.4.4 Storage Configuration
Storage Configuration
Storage Configuration
Storage Configuration
Storage Configuration
SATAII Operation Mode
Use this to select SATAII Operation Mode. Configuration options: [IDE],
[RAID], [AHCI] and [Disabled]. The default value is [IDE].
If you select [IDE] mode, the options “SATAII 1,2,3,4 Configuration” and
“SATAII 5,6 Configuration” will appear.
If you select [RAID] or [AHCI] mode, the options “Hot Plug” and “Link Power
Management” will appear.
AHCI (Advanced Host Controller Interface) supports NCQ and other
new features that will improve SATA disk performance but IDE
mode does not have these advantages.
Onboard eSATAII & IDE
Use this item to enable or disable onboard eSATAII & IDE. The default
value is [Enabled]. If you enable this item, the option “eSATAII Operaion
Mode” will appear.
ACPI HPET Table
Use this item to enable or disable ACPI HPET Table. The default value is
[Disabled]. Please set this option to [Enabled] if you plan to use this
motherboard to submit Windows
®
Vista
TM
certification.
