1 7
1 7
1 7
1 7
1 7
1. High Definition Audio supports Jack Sensing, but the panel wire on
the chassis must support HDA to function correctly. Please follow the
instruction in our manual and chassis manual to install your system.
2. If you use AC’97 audio panel, please install it to the front panel audio
header as below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for HD audio panel only. You don’t
need to connect them for AC’97 audio panel.
E. Enter BIOS Setup Utility. Enter Advanced Settings, and then select
Chipset Configuration. Set the Front Panel Control option from
[Auto] to [Enabled].
CD
-L
GND GND
CD
-R
CD1
J_SENSE
OUT2_L
1
MI
C
_
R
ET
P
R
ESEN
C
E#
G
N
D
OUT2_
R
MI
C
2_
R
MI
C
2_L
OUT_
R
ET
USB 2.0 Headers
Besides four default USB 2.0
(9-pin USB6_7)
ports on the I/O panel, there are
(see p.9 No. 17)
two USB 2.0 headers on this
motherboard. Each USB 2.0
header can support two USB
2.0 ports.
(9-pin USB4_5)
(see p.9 No. 18)
US
B_
P
WR
US
B_
P
WR
P
+7
P
-7
P
+6
P
-6
GND
GND
D
U
MMY
1
US
B
_PW
R
US
B
_PW
R
P+5
P-5
P+4
P-4
G
N
D
G
N
D
D
UMMY
1
Internal Audio Connector
This connector allows you
(4-pin CD1)
to receive stereo audio input
(CD1: see p.9 No. 24)
from sound sources such as
a CD-ROM, DVD-ROM, TV
tuner card, or MPEG card.
Front Panel Audio Header
This is an interface for front
(9-pin HD_AUDIO1)
panel audio cable that allows
(see p.9 No. 22)
convenient connection and
control of audio devices.
connect to the SATA HDD
power connector
connect to the
power supply
Serial ATA (SATA)
Please connect the black end of
Power Cable
SATA power cable to the power
(Optional)
connector on each drive. Then
connect the white end of SATA
power cable to the power
connector of the power supply.
