ASROCK P43D1600TWINS, Installation Manual

Page: 26 / 207

2 6 2 6
2 6 2 6 2 6
ASRock Motherboard
EnglishEnglishEnglishEnglishEnglish
2.7 HDMI_SPDIF Header Connection Guide 2.7 HDMI_SPDIF Header Connection Guide
2.7 HDMI_SPDIF Header Connection Guide 2.7 HDMI_SPDIF Header Connection Guide
2.7 HDMI_SPDIF Header Connection Guide
HDMI (High-Definition Multi-media Interface) is an all-digital audio/video specification,
which provides an interface between any compatible digital audio/video source, such as
a set-top box, DVD player, A/V receiver and a compatible digital audio or video monitor,
such as a digital television (DTV). This motherboard is equipped with a HDMI_SPDIF
header, which provides SPDIF audio output to HDMI VGA card, allows the system to
connect HDMI Digital TV/projector/LCD devices. To use HDMI function on this
motherboard, please refer to page 30 of “User Manual” in the support CD for detailed
installation procedures.
2.8 eSA 2.8 eSA
2.8 eSA 2.8 eSA 2.8 eSATTTTTAII Inter
AII Inter
AII Inter AII Inter AII Interface Introduction
face Introduction
face Introduction face Introduction face Introduction
How to install eSATAII?
eSATAII connector
(eSATAII)
SATAII connector
SATAII_6 (Port5)
NOTE:
1. If you set “Configure SATAII as” option in BIOS setup to AHCI mode, Hot Plug
function is supported with eSATAII devices. Therefore, you can insert or remove your
eSATAII devices to the eSATAII ports while the system is power-on and in working
condition.
2. If you set “Configure SATAII as” option in BIOS setup to IDE mode, Hot Plug function
is not supported with eSATAII devices. If you still want to use eSATAII function in IDE
mode, please insert or remove your eSATAII devices to the eSATAII ports only when
the system is power-off.
3. Please refer to page 28 to 30 for detailed information of IDE mode and AHCI mode.