2 1
+5V
DUMMY
DUMMY
SPEAKER
1
GND
PWRBTN#
PLED-
PLED+
DUMMY
RESET#
GND
HDLED+
HDLED-
1
MIDI_OUT
JAB2
JBY
JBB2
MIDI_IN
+5V
JAY
GND
GND
1
JAX
JAB1
+5V
JBX
JBB1
+5V
GND
+12V
CHA_FAN_SPEED
GND
+12V
CPU_FAN_SPEED
N/C
System Panel Header
This header accommodates
(9-pin PANEL1)
several system front panel
(see p.8 No. 13)
functions.
Chassis Speaker Header
Please connect the chassis
(4-pin SPEAKER 1)
speaker to this header.
(see p.8 No. 14)
Chassis Fan Connector
Please connect a chassis fan
(3-pin CHA_FAN1)
cable to this connector and
(see p.8 No. 15)
match the black wire to the
ground pin.
CPU Fan Connector
You may connect either a 3-pin
(4-pin CPU_FAN1)
or a 4-pin CPU fan cable to this
(see p.8 No. 8)
connector, then match the black
wire to the ground pin.
Note: If you use a 3-pin CPU fan cable, insert it to the connector by aligning it with the pins “GND”,
“+12V”, and “CPU_FAN_SPEED”.
ATX Power Connector
Please connect an ATX power
(20-pin ATXPWR1)
supply to this connector.
(see p.8 No. 34)
Game Port Connector
Connect a Game cable to
this
(15-pin GAME1)
connector if the Game port
(see p.8 No. 21)
bracket is installed.
ATX 12V Connector
Please note that it is necessary
(4-pin ATX12V1)
to connect a power supply with
(see p.8 No. 2)
ATX 12V plug to this connector
so that it can provides CPU
Vcore power. Failing to do so
will cause the failure to power up.
