1 5
2.6
Connectors
Connectors are NOT jumpers. DO NOT place jumper caps over these
connectors. Placing jumper caps over the connectors will cause perma-
nent damage of the motherboard!
FDD Connector
(33-pin FLOPPY1)
(see p.7 item 16)
Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the
connector.
Primary IDE Connector (Blue)
Secondary IDE Connector (Black)
(39-pin IDE1, see p.7 item 8)
(39-pin IDE2, see p.7 item 7)
80-conductor, ATA 66/100/133 cable
Note: If you use only one IDE device on this motherboard, please set the IDE
device as “Master”. Please refer to the instruction of your IDE device vendor
for the details. Besides, to optimize compatibility and performance, please
connect your hard disk drive to the primary IDE connector (IDE1, blue) and
CD-ROM to the secondary IDE connector (IDE2, black).
Shared USB 2.0 Header
This USB45 connector is shared
(9-pin JUSB45)
with the USB 2.0 ports 4,5 on
(see p.7 item 25)
ASRock I/O Plus
TM
. When using
the front panel USB ports by
attaching the front panel USB
cable to this connector
(JUSB45), the USB ports 4,5 on
ASRock I/O Plus
TM
will not be able
to function.
Internal Audio Connectors
These connectors allow you to
(4-pin CD1, 4-pin AUX1)
receive stereo audio input from
(CD1: see p.7 item 17)
sound sources such as a CD-
(AUX1: see p.7 item 18)
ROM, DVD-ROM, TV tuner card,
or MPEG card.
CD-R
GND
GND
CD-L
AUX-R
GND
GND
AUX-L
CD1
AUX1
USB_PWR
1
P-4
GND
DUMMY
USB_PWR
P+4
GND
P-5
P+5
connect the blue end
to the motherboard
FLOPPY1
Pin1
IDE1
PIN1
IDE2
PIN1
connect the black end
to the IDE devices
the red-striped side to Pin1
