2 2
Appendix: Advanced BIOS Setup
This section will introduce you the following BIOS Setup menus: “Advanced,”
“Security,” “Power,” “Boot,” and “Exit.”
1. Advanced BIOS Setup Menu
Spread Spectrum
This field should always be [Disabled] for better system stability.
CPU Host Frequency
[Auto]
It is recommended to select this option, which will let the CPU host frequency of
this motherboard determined by the jumper-setting.
[Manual]
This allows user to set CPU host frequency manually. However, because the
CPU host frequency of this motherboard is determined by the jumper-setting,
you must set the FSB jumper adjustment according to your AMD CPU before you
use this “Manual” option as the FSB setting in BIOS setup to perform over
clocking. This is not recommended unless you thoroughly know the feature.
Wrong setup may cause problems during operation.
DRAM Frequency
If set to [Auto], the motherboard will detect the inserted memory module(s) and
automatically assign appropriate frequency. You may select other value as
operating frequency: [133MHz (DDR266)], [166MHz (DDR333)],
[200MHz (DDR400)].
Flexibility Option
The default value of this option is [Disabled]. It will allow better tolerance for
memory compatibility when it is set to [Enabled].
AMIBIOS SETUP UTILITY - VERSION 3.31a
Main
Advanced
Security
Power
Boot
Exit
Spread Spectrum
Configuration
Configuration
CPU Host Frequency
Actual Frequency
DRAM Frequency
Flexibility Option
Chipset Configuration
Resource
Peripheral
System Hardware Monitor
[
Setup Help
]
Auto
133MHz
Auto
Disabled
<Enter> to enable or
disable the feature of
spread spectrum.
F1:Help
Esc:Exit
F9:Setup Defaults
F10:Save & Exit
+/-:Change Values
Enter:Select
Sub-Menu
:Select Item
:Select Menu
Disabled
