2 3
Chipset Configuration:
AGP Mode:
This motherboard supports the AGP 4X interface that transfers
video data at 1066MB/s. Other configuration options are 2X mode and 1X
mode.
AGP Aperture Size:
It refers to a section of the PCI memory address range
used for graphics memory. It is recommended to leave this field at the
default value unless the installed AGP card’s specifications requires other
sizes.
AGP Fast Write:
This allows you to enable or disable the feature of AGP fast
write protocol support.
OnBoard VGA Share Memory:
This allows you to select the size of share
memory for onboard VGA. Onboard VGA will get better resolution if larger
size of share memory is selected. Please do not select [None] if AGP or PCI
graphics card is not inserted.
PCI Delay Transaction:
Enable PCI Delay Transaction feature will free the PCI
Bus when the CPU is accessing 8-bit ISA cards. Disable this feature when
using ISA cards that are not PCI 2.1 compliant.
USB Controller:
Use this to enable or disable the use of USB controller.
USB Device Legacy Support:
Use this to enable or disable the support to
emulate legacy I/O devices such as mouse, keyboard,... etc.
SDRAM CAS# Latency:
This is used to adjust the means of memory accessing. Configuration options:
[2.5], [2].
Over Vcore Voltage:
Enable this item will increase the CPU Vcore voltage
3% or +6%. The default value is [Disabled].
It is not recommended to enable “Over Vcore Voltage” feature.
Doing so may cause CPU damage.
AMIBIOS SETUP UTILITY - VERSION 3.31a
Advanced
AGP Mode
AGP Aperture Size
AGP Fast Write
Onboard VGA Share Memory
PCI Delay Transaction
USB Controller
USB Device Legacy Support
Over Vcore Voltage
SDRAM CAS# Latency
[
Setup Help
]
F1:Help
Esc:Previous Menu
F9:Setup Defaults
F10:Save & Exit
+/-:Change Values
Enter:Select
Sub-Menu
:Select Item
Chipset Configuration
128MB
Disabled
32MB
Disabled
Enabled
Disabled
2.5
Disabled
<Enter> to select AGP
Mode: 4X, 2X, 1X.
4x
