19
TPM Header
This connector supports a
(19-pin TPM1)
Trusted Platform Module (TPM)
(
see p.8, No. 28)
system, which can
securely store keys, digital
certiicates, passwords, and
data. A TPM system also helps
enhance network security,
protects digital identities, and
ensures platform integrity.
1. High Deinition Audio supports Jack Sensing, but the panel wire on
the chassis must support HDA to function correctly. Please follow the
instruction in our manual and chassis manual to install your system.
2. If you use AC’97 audio panel, please install it to the front panel audio
header as below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for HD audio panel only. You don’t
need to connect them for AC’97 audio panel.
E. To activate the front mic.
Go to the “FrontMic” Tab in the Realtek Control panel. Adjust
“Recording Volume”.
1
GND
GND
S_PWRDWN#
LAD2
SMB_CLK_MAIN
PCICLK
PCIRST#
LAD3
+3.3V
LAD0
GND
FRAME
SMB_DATA_MAIN
LAD1
SERIRQ#
GND
+3.3V STANDBY
48MHz
+5V
ATX Power Input/Output Connector
Please connect a DC 12V
(4-pin INT_DC1)
power supply to this connector.
(see p.8 No. 3)
PS2 Keyboard/Mouse Header
(8-pin PS2_KB_MS1)
(see p.8 No. 2)
1
PIN
Signal
Name
PIN
Signal
Name
PIN
Signal
Name
PIN
Signal
Name
8
GND
6
GND
4
+5V
STANDBY
2
+5V
STANDBY
7
MSCLK
5
MSDATA
3
KBDATA
1
KBCLK
3W Audio AMP Output Wafer
(4-pin SPEAKER1)
(see p.8 No. 26)
PIN
Signal Name
4
SPK R-
3
SPK R+
2
SPK L+
1
SPK L-
1
12V
GND
12V
GND
