18
Panel BackLight PWR Setting
Use this to set up the backlight
(LCD_BLT_VCC)
power of the LVDS connector
(3-pin BKT_PWR1)
and the panel backlight power
(see p.9 No. 29)
of BLT_PWM1.
1-2: +5V
2-3: +12V
Panel Resolution Selection
(12-pin JLVD_GPIO1)
(see p.9 No. 30)
COM Port PWR Setting Headers
(10-pin SET_CM1, For COM Port1)
(10-pin SET_CM2, For COM Port2)
(see p.9 No. 1)
(10-pin SET_CM4, For COM Port4)
(10-pin SET_CM5, For COM Port5)
(10-pin SET_CM6, For COM Port6)
(see p.9 No. 23)
(5-pin SET_CM3, For COM Port3)
(see p.9 No. 32)
If you want to use BIOS to
set Panel type, then set all
GPIO[3:0]= “1111”. If you
want to use jumpers to set
Panel type, select “Set by
Jumper” in BIOS.
+12VIO
RRI#
+5VIO
CM_P9
DDCD#
+12VIO
CM_P9
CM_P1
CM_P1
+5VIO
1
+12VIO
1
DDCD#
CM_P1
CM_P1
+5VIO
+12VIO
RRI#
+5VIO
CM_P9
DDCD#
+12VIO
CM_P9
CM_P1
CM_P1
+5VIO
1
SATAPWR_SEL1
Open: SATA2_2 pin7 = NC
(2-pin SATAPWR_SEL1)
Short: SATA2_2 pin7 = +5V
(see p.9 No. 11)
1
